GENNY 2.0 - Formaldehyde vapor generator

GENNY 2.0 - Formaldehyde vapor generator
The Ortner PLUS
  • powerful evaporation module without hot plate concept
  • integrated heater module, for example to allow heating of air ducts 
  • automatic measurement of gas concentration in the room with room clearance display
  • permanent limit value monitoring
  • automatic chart with concentration trends
  • suited for controlling synchronized nozzle systems
  • user-friendly recipe management 350 m³/h
  • for more information please see data sheet or upon request

The Genny 2.0 is a very powerful formalin generator system. The generator provides interactive communication (also with third-party systems). Thanks to the variably settable volumetric flow rates up to 350 m³/h and the process variety, decontaminations can be realised via nozzle and ventilation systems and over far distances. The generated gas flow can be optional built up “intensively highly concentrated“ or „gradually continuous“ (= superinduce effect) and can be introduced into the room. This system is suited for efficient decontamination processes and for room volumes of up to 100 m³.

Neutralization can be carried out by means of ammonia or by residue-free chemisorption. Large
quantities of formalin can be evaporated via external expanding reservoir.

Technical specifications
  • Casing
    plastic (ABS)
  • Power consumption
    6 kW / 14 A
  • Voltage
    230 VAC or 3 × 400 VAC/50 Hz/N/PE
  • Fan
    electronic speed control
  • Control panel
    Siemens S7 1200
  • Cycle storage
    1–10 (can be extended)
  • Pump
    high precision dosing pump +/− 1%
  • Life cycle of the pump
    10 000 operating hours
  • Scale range
    0 - 6000 g
  • Signalization
    signal light (red/green/yellow))
  • Injection rate
    1–12 g/min
  • Room temperature
    0 - 40 °C
  • Volume flow
    variable up to350 m³/h
  • Touch panel
    TP 700 Comfort (colour)
  • CH2O Reservoir
    up to 5 litre (4 - 12% CH2O)
  • Max. room size
    usable up to 100 m³
  • Internal pipeline material
    stainless steel
  • Weight
    approx. 200 kg
  • Swivel casters
    swivel casters with directional lock
  • for more information please see data sheet or upon request
  • HC Sensor
  • LC Sensor
  • fitted gassing nozzle
  • comfort display module for remote control via WLAN
  • ammonia reservoir 5 litre
  • audit trail
System Options*
  • externally docked H14 Filter
  • chemisorption to neutralisation
  • room pressure control
  • external reservoir extention
Standard hardware interfaces
  • LAN
  • USB
  • start/stop contact
  • power supply
  • nozzles regulation
Standard external output
  • operation
  • total interference
  • CH2O system
  • active ventilation
Ortner Reinraumtechnik GmbH - Logo
Pure safety Intelligent technology Ortner Reinraumtechnik GmbH - Products
Cleanliness - made in Austria
Ortner Reinraumtechnik GmbH - Logo